* Stereo, Parallel, and Mono Bridge Modes

* User selectable input sensitivity: 0.775V or 1.4V

* RCA and XLR input connectors; Speakon® and speaker binding post output connectors

* Protection circuit against short circuit, no load, on/off noise and radio frequency inference

SPECIFICATIONS：

* Power Stereo, 4Ω Per Channel: 1350W

* Power Stereo, 8Ω Per Channel: 1000W

* Power Bridged Mono, 8Ω: 2700W

* Frequency Response: 20 Hz - 20 kHz, +0/-1dB 

* Total Hormonic Distortion (THD): <0.5%, 20 Hz – 20kHz

* Intermodulation Distortion: =/ <0.35% (from full rated output to-30dB)

* Conversion Rate: >10V/us

* Voltage Gain: 36dB

* Damping Factor: >200 (8Ω, 10 Hz – 400 Hz)

* Signal To Noise Ratio (below rated power 20 Hz to 20 kHz, A-Weighted): >100 dB

* Crosstalk: -75dB at 1kHz, -59dB at 20kHz

* Input Sensitivity: 0.775V or 1.4V (rated power 8Ω)

* Input Impedance: 20kΩ Balanced, 10kΩ Unbalanced

* Input Connectors: Balanced XLR and one unbalanced RCA per channel

* Output Connectors: 4-POLE Spekon® and pair of binding posts per channel

* Front Panel Components: Power switch, channel gain control

* Rear Panel Components: Output mode switch: stereo, parallel, bridge, Input sensitivity switch: 0.775V or 1.4V

* Power Indicator: Blue and green two-colour LED

* Signal Indicator: One green LED per channel

* Clip Indicator: One yellow LED per channel

* Fault Indicator: Red LED per channel, indicating that the channel is closed

* Power cables: Plug: 10A, 250V, Wire: CCC 3x15cm2

* Protection: Protection against short circuit, no load, on / off noise, radio interference protection circuit

* Ventilation: Air convection mechanism

* Cooling: Internal air is forced to dissipate heat, fan cooling, rapid adjustment, temperature protection